Iron Shell Welding Auto Spark Plugs Fiat Brava 1.2L 1.6L (1997-) 71719244

Auto Spark Plugs Fiat Brava Doblo Marea Palio 1.2L 1.6L (1997-) 71719244

1, OE Number or Parts Number

71719244 / 46417010 / 46799927 / 7571541 / 467 9992 70 / 46480362 / 46531918 / 9 GYSR / 46551935

2, Fit Model

3 , Testing And Warranty

4 , Assembly production

1, after forming the need for internal voltage test, after 25000V high voltage on each of the detection of whether the breakdown of insulation and leakage, excluding unqualified products.

2, through the hot-pressing assembly line, the insulator and iron shell welding. And we are using hot riveting welding technology, this technology is currently Bosch's spark plug is also being used. Because the welding is the need for heating, so in the hexagonal screw will be under a circle of light blue halo. The NGK is the use of cold riveting technology, so the insulator and iron shell where there will be a small layer of pale white powder.

3, the detection of quality problems of finished products, for packaging.

5 , Ceramic production

1, the purchase of ceramic powder back through the ball mill grinding, grinding out the appropriate size and density of particles.

2, tune the good particles through our pipeline transportation, delivery to the granulation tower.

3, granulation tower is our unique ceramic production process - isostatic pressing technology, mainly grinding the particles with isostatic pressing technology directly dry forming, so that there is no air between the particles and the gap between the particles to ensure that Density. Isostatic technology At present, except for our industry only NGK, DENSO, champion, Bosch and the torch has a set of technology, the technology than the traditional hot melt technology, high pressure, resistance to wear, high temperature ability times several times.

4, after the formation of particles through the constant temperature tunnel kiln, which is through the natural gas calcination molding - the temperature up to 1580 degrees, higher than the engine normal operating temperature (500 degrees -800 degrees).

5, after the ceramic insulator after the glaze, make it smooth, bright. And then printed on the outside of the corresponding printing.

6 , FAQ (Fluently Asked Questions)

Q1. If we don't find the model type here, Please tell us.

1, Please send us your OEM number.

2, Please send us your photo and products size if you have.

3, Please tell us your exact car model if you do not have photo or OEM number.

Q2. Can you produce according to the samples?
1, Yes,we can offer a sample,also for some items,the sample is free,for others,not. It depends.Please feel free to contact us for more information about the sample.
And buyers should pay for the shipping fee.

Q3. Do you test all your goods before delivery?
1, Yes, we have 100% test before delivery.

Q4. What is your terms of payment?
1, T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.

  Shanghai Hongshi Mechanical Co., Ltd is the production of auto parts as the main product of the enterprise. In order to facilitate the export of goods and the reception of customers, the board of directors decided to set up a professional sales company. So the Shanghai Hongshi Mechanical Co., Ltd was founded in Shanghai in 2015. Our company own 5 factories and cooperate with 13 factories. The factory covers an area of 200 thousand square meters, mainly in Anhui, Jiangsu, Zhejiang, Shandong, Hebei provinces. The main products: ignition coil, spark plug, spark plug, nozzle, filter, solar term door, fuel pump, brake, starter, engine, compressor, blower control module and other auto parts. We have the ability to provide customers with mass production and diversity.

  Our factories have professional professors, senior engineers and other technical personnel, and constantly research and develop the new materials, more durable, safer products. The structure is more optimized and the cost is lower. Enjoy a high reputation in the industry.

  Our factories has advanced equipment of production, such as: high precision sealing machine imported from Germany (brand name: Heydrich), high speed automatic winding machine from Japan, all kinds of equipment of testing and application by homemade, fully automated assembly line production, advanced casting equipment, cold extrusion equipment, high-precision CNC processing equipment, and advanced ceramic manufacturing equipment. Provide a strong guarantee for the quality of our products and our reputation.

  Our products manufactured by the factory are strictly inspected by the quality department before they can be sent to the customer. The quality engineers conduct a rigorous inspection of the raw material and process of the product. Conduct effective testing of products using various simulated laboratory equipment to make sure the product safely and durably.

  Our current dozens of types of products are exported to North America, South America, Europe, Asia and part of Africa. In 2016, our customers were satisfied with our products and services by 98%. We will continue to strive to provide customers with better products and services.

The pursuit of customer satisfaction is the eternal goal of every employee of Xineng. For those who use our accessories, happy travel, safe home. It is the target of fine production for our staff.