
Iridium Spark Plugs Ford Focus Mondeo S-Max S60 2.0L (2010-) 1686133
OE Number Or Parts Number And Testing
1, Model No : DSP1024
2, OE NO / (Part number) : 1686133 / 5100429 / LR025605 / 30758130 / HR7NI332W / 0 242 236 574
3, Test capability : Salt Spray Test ,OK / High Temperature Endurance,OK
4, Power : Powerfull Withstand high temperature and high pressure
5, Inspection : 100% inspection
6, warranty : 1 Year / 50000 km
Fit Model
S60 II 2.0 T | 1999 | 149 | 4 | Saloon | 2010- |
S60 II T5 | 1999 | 177 | 4 | Saloon | 2010- |
S80 II (AS) 2.0 T | 1999 | 149 | 4 | Saloon | 2010- |
S80 II (AS) T5 | 1999 | 177 | 4 | Saloon | 2010- |
V60 2.0 T | 1999 | 149 | 4 | Estate | 2010- |
V60 T5 | 1999 | 177 | 4 | Estate | 2010- |
V70 III (BW) 2.0 T | 1999 | 149 | 4 | Estate | 2010- |
V70 III (BW) T5 | 1999 | 177 | 4 | Estate | 2010- |
XC60 Estate 2.0 T | 1999 | 149 | 4 | Estate | 2010- |
XC60 Estate T5 | 1999 | 177 | 4 | Estate | 2010- |
Production Process
Ceramic production:
1, the purchase of ceramic powder back through the ball mill grinding, grinding out the appropriate size and density of particles.
2, tune the good particles through our pipeline transportation, delivery to the granulation tower.
3, granulation tower is our unique ceramic production process - isostatic pressing technology, mainly grinding the particles with isostatic pressing technology directly dry forming, so that there is no air between the particles and the gap between the particles to ensure that Density. Isostatic technology At present, except for our industry only NGK, DENSO, champion, Bosch and the torch has a set of technology, the technology than the traditional hot melt technology, high pressure, resistance to wear, high temperature ability times several times.
4, after the formation of particles through the constant temperature tunnel kiln, which is through the natural gas calcination molding - the temperature up to 1580 degrees, higher than the engine normal operating temperature (500 degrees -800 degrees). 5, after the ceramic insulator after the glaze, make it smooth, bright. And then printed on the outside of the corresponding printing.
Iron production:
1, iron shell grinding: finished semi-finished products after grinding the shell, polished a variety of spark plug models of the hexagonal side.
2, the welding side of the electrode: polished after the top of the iron in the top of the need for welding side of the electrode.
3, grinding screw: grinding the required thread size and thread length.
4, pressing the number: pressed to build the number.
5, electroplating: to the finished steel shell plating, electroplating is divided into matt and bright nickel two, although the appearance of different colors, but does not affect the quality and performance of spark plugs.
FAQ (Fluently Asked Questions)
Q1. Can you produce according to the samples?
1, Yes,we can offer a sample,also for some items,the sample is
free,for others,not. It depends.Please feel free to contact us for
more information about the sample.
And buyers should pay for the shipping fee.
Q2. What is your sample policy?
1, We can supply the sample if we have ready parts in stock, but
the customers have to pay the sample cost and the courier cost.
Q3. Do you test all your goods before delivery?
1, Yes, we have 100% test before delivery.
Q4. What is your terms of payment?
1, T/T 30% as deposit, and 70% before delivery. We'll show you the
photos of the products and packages before you pay the balance.
Shanghai Hongshi Mechanical Co., Ltd
Shanghai Hongshi Mechanical Co., Ltd is the production of auto parts as the main product of the enterprise. In order to facilitate the export of goods and the reception of customers, the board of directors decided to set up a professional sales company. So the Shanghai Hongshi Mechanical Co., Ltd was founded in Shanghai in 2015. Our company own 5 factories and cooperate with 13 factories. The factory covers an area of 200 thousand square meters, mainly in Anhui, Jiangsu, Zhejiang, Shandong, Hebei provinces. The main products: ignition coil, spark plug, spark plug, nozzle, filter, solar term door, fuel pump, brake, starter, engine, compressor, blower control module and other auto parts. We have the ability to provide customers with mass production and diversity.
Our factories have professional professors, senior engineers and other technical personnel, and constantly research and develop the new materials, more durable, safer products. The structure is more optimized and the cost is lower. Enjoy a high reputation in the industry.
Our factories has advanced equipment of production, such as: high precision sealing machine imported from Germany (brand name: Heydrich), high speed automatic winding machine from Japan, all kinds of equipment of testing and application by homemade, fully automated assembly line production, advanced casting equipment, cold extrusion equipment, high-precision CNC processing equipment, and advanced ceramic manufacturing equipment. Provide a strong guarantee for the quality of our products and our reputation.
Our products manufactured by the factory are strictly inspected by the quality department before they can be sent to the customer. The quality engineers conduct a rigorous inspection of the raw material and process of the product. Conduct effective testing of products using various simulated laboratory equipment to make sure the product safely and durably.
Our current dozens of types of products are exported to North America, South America, Europe, Asia and part of Africa. In 2016, our customers were satisfied with our products and services by 98%. We will continue to strive to provide customers with better products and services.
The pursuit of customer satisfaction is the eternal goal of every employee of Xineng. For those who use our accessories, happy travel, safe home. It is the target of fine production for our staff.