Custom Auto Spark Plugs / Honda Accord Spark Plugs 1.3L 1.6L (1979-) 98079-55146

Auto Spark Plugs Honda Accord Prelude 1.3L 1.6L (1979-) 98079-55146

1, OE Number or Parts Number

98079-55146 / 98079-55145 / 3707150J11#A00 / 98079-56145 / 0 002 330 702 / BP 5ET-10 / R 44XLS-11

2, Fit Model

3 , Testing And Warranty

4 , Sparkling Category

1, Size: According to thread size, thread length and hexagonal classification, like the model with DK LD DM (M12 × 1.25), their threads than other general and professional spark plugs to fine (M12 X 1.25).

2, calorific value: popular point that is the size of the spark plug heat capacity, which is related to the requirements of the engine. The general engine requires a spark plug between 6 and 7, with a turbocharged engine on the need 8. The greater the power, the need for greater heat dissipation, and vice versa. But when the heat value is too high will make the insulator below the ignition side, will make the top carbon deposition, affecting the ignition. When the calorific value is too low, it is easy to melt the electrode and damage the engine.

3, whether the resistance: the current domestic car engine fuel injection are many using EFI, so the original spark plugs are with resistance. The main role of resistance is to shield and suppress the impact of electromagnetic waves on the spark plug.

4, electrode classification: from the material that is divided into nickel copper (ordinary), platinum and iridium. Which iridium platinum represents the center electrode is platinum and the electrode is platinum. Compared to other common materials, iridium platinum performance: 1, start performance better, because the need to start the lower the voltage, the easier to start (iridium need the lowest voltage, followed by platinum, the highest general). 2, the higher the melting point, the longer life. The iridium has a melting point of 2454 °, a platinum of 1769 ° and a nickel copper of 1453 °. 3, cutting-edge discharge, will burn more fully, more power, the ignition side is not easy to carbon deposition. 5, the gap: the size of the gap will affect the ignition end of the flame core size. The larger the gap, the bigger the flame, and vice versa. This is required to adjust in accordance with the requirements of the engine, if the gap is too large, will cause the ignition system needs to increase the voltage, may lead to fire, fuel economy and damage to the ignition system. If the gap is too small, it will cause the phenomenon of not flashing (sales to remind the repair master before the installation, you must observe whether there is contact between the electrodes, because the logistics or other conditions caused by bumps caused by falling on the ground so that two motors stick Together).

5 , Iron production

1, the welding side of the electrode: polished after the top of the iron in the top of the need for welding side of the electrode.

2, grinding screw: grinding the required thread size and thread length.

3, pressing the number: pressed to build the number.

4, electroplating: to the finished steel shell plating, electroplating is divided into matt and bright nickel two, although the appearance of different colors, but does not affect the quality and performance of spark plugs.

6 , FAQ (Fluently Asked Questions)

Q1. If we don't find the model type here, Please tell us.

1, Please send us your OEM number.

2, Please send us your photo and products size if you have.

3, Please tell us your exact car model if you do not have photo or OEM number.

Q2. What is your terms of packing?

1, Generally, the product is loaded into a white bubble bag or foam box and then loaded into a neutral carton.

2, You can also use our DMCOIL brand box.

3, Of course, if you have your own box is also possible.

Q3. Can you produce according to the samples?
1, Yes,we can offer a sample,also for some items,the sample is free,for others,not. It depends.Please feel free to contact us for more information about the sample.
And buyers should pay for the shipping fee.

Q4. What is your sample policy?
1, We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.

Q5. I want to buy your products, how can I pay?

1, Through bank transfer,we'll show the account information on PI.

2, Others:We can make specifications according to customer's requirement.

  Shanghai Hongshi Mechanical Co., Ltd is the production of auto parts as the main product of the enterprise. In order to facilitate the export of goods and the reception of customers, the board of directors decided to set up a professional sales company. So the Shanghai Hongshi Mechanical Co., Ltd was founded in Shanghai in 2015. Our company own 5 factories and cooperate with 13 factories. The factory covers an area of 200 thousand square meters, mainly in Anhui, Jiangsu, Zhejiang, Shandong, Hebei provinces. The main products: ignition coil, spark plug, spark plug, nozzle, filter, solar term door, fuel pump, brake, starter, engine, compressor, blower control module and other auto parts. We have the ability to provide customers with mass production and diversity.

  Our factories have professional professors, senior engineers and other technical personnel, and constantly research and develop the new materials, more durable, safer products. The structure is more optimized and the cost is lower. Enjoy a high reputation in the industry.

  Our factories has advanced equipment of production, such as: high precision sealing machine imported from Germany (brand name: Heydrich), high speed automatic winding machine from Japan, all kinds of equipment of testing and application by homemade, fully automated assembly line production, advanced casting equipment, cold extrusion equipment, high-precision CNC processing equipment, and advanced ceramic manufacturing equipment. Provide a strong guarantee for the quality of our products and our reputation.

  Our products manufactured by the factory are strictly inspected by the quality department before they can be sent to the customer. The quality engineers conduct a rigorous inspection of the raw material and process of the product. Conduct effective testing of products using various simulated laboratory equipment to make sure the product safely and durably.

  Our current dozens of types of products are exported to North America, South America, Europe, Asia and part of Africa. In 2016, our customers were satisfied with our products and services by 98%. We will continue to strive to provide customers with better products and services.

The pursuit of customer satisfaction is the eternal goal of every employee of Xineng. For those who use our accessories, happy travel, safe home. It is the target of fine production for our staff.