Powerfull Auto Spark Plugs Improving Engine Power For Lada Opel Ascona Kadett

Auto Spark Plugs Lada Opel Ascona Kadett 1.5L 1.6L (1981-) 12 14 803

1, OE Number or Parts Number

12 14 803 / 12 14 007 / 12 14 008 / BPR6ES11 / 3049 / 4824

2, Fit Model

3 , Testing And Warranty

4 , Structure introduction

Due to the spark plug and the engine between the relationship between the ever-changing engine technology is bound to promote the spark plug of continuous innovation.
Spark plug through the history of development and progress, you can see the evolution of spark plug structure and change.

1, standard and prominent spark plugs
The standard spark plug is a single side electrode spark plug that is slightly lower than the end of the housing thread. It uses the most widely used conventional ignition end structure for side-mounted valve engines. In order to distinguish it from the later "prominent type", this structure is called "standard type".
The protruding spark plug was originally designed for overhead valve engines, and its insulator skirt protrudes into the combustion chamber. In the combustion of the mixture to absorb more heat, idle at a higher working temperature, to avoid fouling; high-speed valve due to the top of the inhaled air flow at the insulator skirt, cooling it, so that the maximum temperature increase , So the heat range is larger. High-grade spark plug is not suitable for side-mounted valve-type engine, because of its inlet and turn more air flow on the insulation of the skirt is not much.
Spark plug
From the ignition effect, the spark should be the best place to flow in the mixture. The engine combustion chamber requires a different optimum ignition location for different structural designs. The ignition position can be understood as the position of the spark gap in the combustion chamber, that is, the distance from the end of the spark electrode center electrode to the end of the housing.
Ordinary protruding spark plug ignition position of 3mm, off-road racing and large displacement motorcycle use of "super-prominent" spark plug, ignition position up to 7 ~ 10mm. Ignition near the center of the combustion chamber, the flame propagation distance is shortened, which will shorten the combustion cycle and reduce the magnitude of pressure changes, is conducive to improving the engine power.

6 , FAQ (Fluently Asked Questions)

Q1. What is your terms of packing?

1, Generally, the product is loaded into a white bubble bag or foam box and then loaded into a neutral carton.

2, You can also use our DMCOIL brand box.

3, Of course, if you have your own box is also possible.

Q2. Can you produce according to the samples?
1, Yes,we can offer a sample,also for some items,the sample is free,for others,not. It depends.Please feel free to contact us for more information about the sample.
And buyers should pay for the shipping fee.

Q3. What is your sample policy?
1, We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.

Q4. Do you test all your goods before delivery?
1, Yes, we have 100% test before delivery.

Q5. What is your terms of payment?
1, T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.

Q6. I want to buy your products, how can I pay?

1, Through bank transfer,we'll show the account information on PI.

2, Others:We can make specifications according to customer's requirement.

  Shanghai Hongshi Mechanical Co., Ltd is the production of auto parts as the main product of the enterprise. In order to facilitate the export of goods and the reception of customers, the board of directors decided to set up a professional sales company. So the Shanghai Hongshi Mechanical Co., Ltd was founded in Shanghai in 2015. Our company own 5 factories and cooperate with 13 factories. The factory covers an area of 200 thousand square meters, mainly in Anhui, Jiangsu, Zhejiang, Shandong, Hebei provinces. The main products: ignition coil, spark plug, spark plug, nozzle, filter, solar term door, fuel pump, brake, starter, engine, compressor, blower control module and other auto parts. We have the ability to provide customers with mass production and diversity.

  Our factories have professional professors, senior engineers and other technical personnel, and constantly research and develop the new materials, more durable, safer products. The structure is more optimized and the cost is lower. Enjoy a high reputation in the industry.

  Our factories has advanced equipment of production, such as: high precision sealing machine imported from Germany (brand name: Heydrich), high speed automatic winding machine from Japan, all kinds of equipment of testing and application by homemade, fully automated assembly line production, advanced casting equipment, cold extrusion equipment, high-precision CNC processing equipment, and advanced ceramic manufacturing equipment. Provide a strong guarantee for the quality of our products and our reputation.

  Our products manufactured by the factory are strictly inspected by the quality department before they can be sent to the customer. The quality engineers conduct a rigorous inspection of the raw material and process of the product. Conduct effective testing of products using various simulated laboratory equipment to make sure the product safely and durably.

  Our current dozens of types of products are exported to North America, South America, Europe, Asia and part of Africa. In 2016, our customers were satisfied with our products and services by 98%. We will continue to strive to provide customers with better products and services.

The pursuit of customer satisfaction is the eternal goal of every employee of Xineng. For those who use our accessories, happy travel, safe home. It is the target of fine production for our staff.