Product Details
Electronic Vehicle Speed limiter with GPS Tracking System,APP,Fuel
Monitoring
1. Safety Requirement
- All cable or harness connectors in the speedometer circuit shall be
wired and sealed. All connections shall be soldered and insulated
with a flame proof insulation tape of adequate length of such a
color as to blend well with the rest of the vehicle wiring.
- The speed limiter function or the Speed limiter device shall
operate satisfactorily in its electromagnetic environment without
unacceptable electromagnetic disturbance for any other device in
the environment.
- The speed limiter device shall pre-warn the driver, by way of a
high frequency buzzer, optionally flashing light signal can be used
that the set speed is being reached.This warming shall occur at 5%
prior to the set speed and shall continue buzzing once the set
speed is achieved/ exceeded.
- When the set speed is reached, the speed limiter device shall
temporarily cause the engine to lose power.Engine power shall be
reinstated at a speed not less than the pre-warning switch
point,which is 5% below the set speed.
2 Product Specifications
Color | Black | Application | free android and IOS app |
Input Fuse | 5A | CPU | TI:MSP430F5419(100MHz) |
Battery | Lithium battery :400mA( working time is about 3.5 hours) | Warranty | 2 years |
Item Name | Top selling shine | Function | camera gps fleet tracker |
Working Temperature | Anna Shi | MOQ | 5 Pieces |
Performance Tests | - Visual Examination. The speed limiter shall be visually examined
for workmanship, finish, marking and general requirements mentioned
in clause 4 pertaining to the components alone
- Functional Test and Power Consumption, The speed limiter shall be
connected to the rated voltage. The speed limiter device shall be
coupled to a suitable test rig and tested for its function viz.
limiting the speed at the set value. The maximum current
consumption is noted. The maximum
current of each type of speed limiter device shall not exceed the
values specified by the manufacturer. - Operating Voltage Range.
| GPS Module | GPS chip set: SiRF Star III Frequency: L1, 1575.42 MHz Number of Channel: 20 Reacquisition: 0.1 sec, average Hot boot: 2 sec., average Warm boot: 38 sec., average Cold boot: 44 sec., average Altitude limit: 18000 m Velocity limit: 515 m/s |
TESTS | Five samples of speed limiter device shall be provided - four
samples for the performance and endurance test described in clause 8.3 and 8.4 and one sample as fitted on the vehicle for carrying out.the tests
prescribed in clause 8.5. In the case of add-on or on-board system
built in the vehicle, the involved system and its components should
be provided separately for the performance and endurance tests | Input I/O | 8 I/O input/output Port 1 main power check 1 port use to check the engine ( ACC check) 1 port use to SOS 1 analog Input port( Fuel sensor) 1 Output port ( Car engine control ) 3 Extend ports ( Input/Output control by software) |
3. Speed Limiter Requirements
Electronic Vehicle Speed limiter with GPS Tracking System,APP,Fuel
Monitoring
- The speed limiter function or road speed limiter shall be
EMCcompatible or shall have Anti-Jammer mechanism;
- The speed limiter device system shall be equipped with a system
which shall accept an external device for testing the speed limiter
and verifying its functionality;
- The speed limiter device system shall be able to be verified.
Authenticated and tested whilst the vehicle is "on" the road;
- The input speed signal shall be obtained from global navigating
system (GNS) or speedometer vehicle speed signal or a converted
speed signal from vehicle gearbox or from other separately
installed sensor as deemed appropriate, mechanical actuator system,
linkages etc. or any unauthorized modification and adjustment to
the system;
- The speed limiter devices shall be of industrial grade and designed
for automotive application;
- The road speed limiting device shall be designed and constructed in
such a way that it can be fitted in a place not easily accessible
Electronic Vehicle Speed limiter with GPS Tracking System,APP,Fuel
Monitoring
- No malfunction or unauthorized interference shall result in an
increase in engine power above the demanded by the position of the
driver's accelerator. The malfunction of the speed limiter devices
shall not affect the normal vehicular performance ;
- The speed limiter function shall be independent of the condition or
soundness of the speedometer ;
- Speed limiter devices shall be so constructed that the vehicle may
not be accelerated by the operation of the acceleration devices,
such as the accelerator pedal, when the vehicle is running at its
set speed;
- The input speed signal shall be obtained from global navigating
system (GNS) or speedometer vehicle speed signal or a converted
speed signal from vehicle gearbox or from other separately
installed sensor as deemed appropriate.
- The speed limiting function shall not cause engine back firing,
- For the purpose of anti-tampering of the setting of the "set speed"
of a speed limiter device, the connection points on a speed limiter
device for adjustment of "set speed" shall be properly sealed and
protected from unauthorized adjustment
4. Technical Parameters:
Electronic Vehicle Speed limiter with GPS Tracking System,APP,Fuel
Monitoring
Item | Parameters |
Overall Size | 20.0 X 9.2 X 4.5 CM |
Host Net Weight | 0.4 KG |
Processing chip | STC |
Speed Limiting Zone | 20-200 Km/H |
Speed Limiting Deviation | ±5Km/H |
Mechanical Bearing Capacity | 400N |
Working Voltage | 9-36 V |
Rated Power Consumption | <0.3 W |
Working Current | <60 mA |
5 Application Field:
- For large vehicle management and dispatching system ;
- For tour bus and passenger car management ;
- For logistics vehicle monitoring and management ;
- For tank truck monitoring and management.
- For Dangerous goods transportation

Company Profile
SHENZHEN YITUOWULIAN SYSTEM CO.,LTD
shenzhen CarTracker Technology Co., Ltd was founded in 2009,it is
one of the most professional manufacturers for gps tracker and
mobile DVR product.Our company is located in Shenzhen
city,Guangdong province,China.At present our GPS Tracker products
are mainly exported to Southeast Asia,Africa,South America,The
Middle East ,Europe and so on.
Our main products are Car GPS Tracker,Personal GPS Tracker,large
battery GPS Tracker and 3G mobile DVR.Every year we develop new
products to meet customer requirements.and they are certified by
CE,ROHS,FCC and 3C certification bodies.
We have a Research and Development team of more than twenty
engineers. Most of them have a master's degree and 12 engineers
have more than 8 years work experience in the GPS Industry.we also
have a group of professional sales and after sales team. they will
provide after-sales and pre-sales technical support for you.
Our factory is located in Cuishan industrial area,we have about
2000 square meters of building area and more 200 production
staff.they are mainly responsible for gps product
production,testing and quality control.our monthly output is more
20000pieces.the factory has passed ISO9001,ISO14000 Certification.
Welcome to visit our factory and we look forward to the opportunity
to cooperate.