264L Digital Industrial Ultrasonic Cleaner AC 110-240V Fuel Pump Gear Cleaned

Industry Type: Aerospace

Description of Part: fuel pump gear

Contaminant: Oil and grease

Specification:

Caution During Cleaning: Rotate part 180º during the cleaning process to insure thorough cleaning.

Direction of use:

RECOMMENDED CLEANING PROCEDURE:

• Fill in the tank with water, put the detergent in , mix the detergent into the water;
• Set up the temperature and ultraosnic workign time. Gernally a temperature of 165º - 180º F in the ultrasonic tank is the best.
• Place the gears into the basket with the cavity with containing heaviest residue facing the bottom of the basket.
• Place the basket into the ultrasonic tank. Rotate the housings keeping them underneath the surface of the solution to allow air bubbles to be removed from the part.
• Clean the part for a 15 min. cycle in the ultrasonic tank. At the end of the cycle rotate the part 180º.
• Clean the part for an additional 15 min. cycle. Clean additional cycles if necessary.
• Once the part is cleaned, remove from the ultrasonic bath and rinse using clean hot water which is 150º F.
• Once rinsed, blow off excess water using filtered compressed air.
• Part will flash dry.

Skymen Technology Corporation Limited, which is a leading manufacturer and national high-tech enterprise, was founded in 2007. There are 2 factories of Skymen, one is located in Shenzhen, closed to HongKong. And the other is located in Shaoguan, Guangdong province, China.

We have been focusing on R&D of ultrasonic equipment & cleaning solution for more than 17 years with over 300 employees and plant size 39,000 square meters. Products include CE, FCC, PSE, KC and other safety certification, as well as ROHS,PAHS, REACH, SCCP environmental certification, and passed the factory audit BSCI, ISO9001 quality management system.

There are more than 200 patents & certificates in total. Our products range covers industrial ultrasonic cleaner, homeuse ultrasonic cleaner, commercial ultrasonic cleaner, full-automatic ultrasonic cleaning machine, ultrasonic transducer rod series, ultrasonic transducer plate series, tunnel cleaning machine, large hydrocarbon ultrasonic cleaning equipment with PLC, large ultrasonic cleaning equipment with vacuum implementation, etc.

2023 Skymen self-built Shaoguan industrial Park

2020 New Factory Industrial Park

Shenzhen R&D Basement

Shenzhen Marketing Center